China wholesaler 20FT 40FT Fixed Length Pulley Electric Container Spreader near me factory

Product Description

20FT 40FT Fixed Length Pulley Eletric Container Spreader

Product discription
The electric fixed container spreader is driven by electric motors,has the advantages of light weight,convenicent maintenance,low cost,etc.It’s power consumption 1/8 of hydraulic spreader.

Drawing

Parameter

Model:QSHIE20/40		Motor power	0.37kw
For operation with ISO standard 20’/40′ containers		Ambient temperature	-20°C~+45°C
Rated lifting load	35T	Twistlock mode	Electric pusher hammer type
Dead weight	3.2T/ 4.9T	Flipper device	no power, fixed flippers
Allowable load eccentricity	±10%	Applications	Portal crane,gantry crane, crane in the plant

Pictures

About us
QSHI supplies different kinds of products. High quality and favorable price.
We’re pleased to get your Inquiry and we will feedback ASAP.
We stick to the principle “Quality First, Service First, Continuous Improvement and Customer Satisfaction” and aim at “Zero Defect Zero Complaint”.
To perfect our service, we provide products with good quality at reasonable price.

Our Service
Being a good adviser and assistant of client, we can help them to get rich and generous returns on their investment.
1.Pre-sale services:
a: Design customized project for clients.
b: Design and manufacture products according to clients special requirement.
c: Train technical personnel for clients.
2.Services during the sale:
a: Help clients to find reasonable freight forwarders ahead of delivery.
b: Help clients to draw solving plans.
3.After-sale services:
a: Assist clients to prepare for the construction scheme.
b: Install and debug equipment.
c: Train the first-line operators.
d: Examine equipment.
e: Take initiative to eliminate the troubles immediately.
f: Provide technical exchanging.

FAQ
ORDER INTRODUCTION:
Pls kindly send us your detailed specifications as follow if you are interested in our container spreaders.
1. What’s the SWL of your crane?
2. What’s the type of your crane?
3. What’s the working condition of spreader?
We will offer you the best suitable solution with best price and quality.
These specifications above can make it clear about your requirements.
Thanks very much for your kindly cooperation!

The importance of pulleys

A pulley is a wheel that rides on an axle or axle. The purpose of the pulley is to change the direction of the tensioning cable. The cable then transfers the power from the shaft to the pulley. This article explains the importance of pulleys and demonstrates several different uses for this machine. Also, see the Mechanical Advantages section below for the different types. let’s start.
pulley

simple machine

A simple pulley machine is a device used to transfer energy. It consists of a wheel with flexible material on the rim and a rope or chain tied to the other end. Then lift the load using the force applied to the other end. The mechanical advantage of this system is one, as the force applied to the load is the same as the force on the pulley shaft.
A simple pulley machine has many benefits, from the ability to build pyramids to building modern buildings with it. Pulleys are also popular with children because they can perform simple tasks such as lifting toys onto a slide, sliding them off the slide, and lifting them up again. These activities, called “transportation” by child development theorists, allow them to learn about the physics of simple machines in the process.
The mechanism works by using cables to transmit force. The cable is attached to 1 side of the pulley and the other side is pulled by the user. Lift the load by pulling on 1 end and the other end of the rope. Simple pulley machines have many commercial and everyday applications, including helping move large objects. They can be fixed or movable, and can be a combination of both. The present invention is a great tool for any beginner or engineer.

axis

The axle wheel is the basic mechanical part that amplifies the force. It may have originally appeared as a tool to lift buckets or heavy objects from a well. Its operation is demonstrated by large and small gears attached to the same shaft. When applied to an object, the force on the large gear F overcomes the force W on the pinion R. The ratio of these 2 forces is called the mechanical advantage.
The ideal mechanical advantage of shaft pulleys is their radius ratio. A large radius will result in a higher mechanical advantage than a small radius. A pulley is a wheel through which a rope or belt runs. Often the wheels are interconnected with cables or belts for added mechanical advantage. The number of support ropes depends on the desired mechanical advantage of the pulley.
In the design of the axle wheel, the axle is the fulcrum and the outer edge is the handle. In simple terms, wheels and axle pulleys are improved versions of levers. The axle pulley moves the load farther than the lever and connects to the load at the center of the axle. Shaft pulleys are versatile and widely used in construction.

rope or belt

Ropes or pulleys are mechanical devices used to move large masses. The rope supports a large mass and can be moved easily by applying a force equal to 1 quarter of the mass to the loose end. Quad pulleys have 4 wheels and provide the mechanical advantage of 4 wheels. It is often used in factories and workshops. It is also a popular choice in the construction industry. If you are installing a pulley in your vehicle, be sure to follow these simple installation instructions.
First, you need to understand the basics of how a rope or pulley works. The machine consists of 1 or more wheels that rotate on an axle. The rope or belt is wrapped around the pulley and the force exerted on the rope is spread around the pulley. It then transfers the force from 1 end of the rope to the other. The pulley system also helps reduce the force required to lift objects.
Another common rope or pulley is the differential pulley. This is similar to a rope pulley, but consists of 2 pulleys of different radii. The tension in the 2 halves of the rope supports half the load that the live pulley should carry. These 2 different types of pulleys are often used together in composite pulley systems.
pulley

Mechanical advantage

The mechanical advantage is the ratio of the force used to move the load through the pulley system to the force applied. It has been used to measure the effectiveness of pulley systems, but it also requires assumptions about applied forces and weights. In a simple 1:1 pulley system, the weight lifting the weight is the same as the weight of the person pulling the weight. Adding mechanical advantage can help make up for the lack of manpower.
This advantage stems from the mechanical properties of simple machines. It requires less force and takes up less space and time to accomplish the same task. The same effect can also be achieved by applying less force at a distance. Furthermore, this effect is called the output force ratio. The basic working principle of a pulley system is a rope with a fixed point at 1 end. The movable pulley can be moved with very little force to achieve the desired effect.
The load can be moved through the vertical entry using a simple pulley system. It can use a simple “pulley block” system with a 2:1 “ladder frame” or a 4:1 with dual pulleys. This can be combined with another simple pulley system to create a compound pulley system. In this case, a simple pulley system is pulling another pulley, giving it a 9:1 mechanical advantage.

Commonly used

You’ve probably seen pulley systems in your kitchen or laundry room. You probably already use it to hang clothes on an adjustable clothesline. You may have seen motor pulleys in the kitchens of commercial buildings. You might even have seen 1 on a crane. These machines use a pulley system to help them lift heavy loads. The same goes for theaters. Some pulleys are attached to the sides of the stage, enabling the operator to move up and down the stage.
Pulley systems have many uses in the oil and petroleum industry. For example, in the oil and gas industry, pulley systems are used to lay cables. They are arranged in a pulley structure to provide mechanical energy. When the rope is running, 2 pulleys are hung on the derrick to facilitate smooth running. In these applications, pulleys are very effective in lifting heavy objects.
A pulley is a simple mechanical device that converts mechanical energy into motion. Unlike chains, pulleys are designed to transfer power from 1 location to another. The force required to lift an object with a pulley is the same as that required by hand. It takes the same amount of force to lift a bucket of water, but it’s more comfortable to pull sideways. A bucket of water weighs the same as when lifted vertically, so it’s easy to see how this mechanism can be useful.
pulley

Safety Notice

When using pulleys, you should take several safety precautions to keep your employees and other workers on the job site safe. In addition to wearing a hard hat, you should also wear gloves to protect your hands. Using pulleys can lead to a variety of injuries, so it’s important to keep these precautions in mind before using pulleys. Here are some of the most common:
Pulleys are an important piece of equipment to have on hand when lifting heavy objects. Pulleys not only reduce the force required to lift an object, but also the direction of the force. This is especially important if you are lifting heavy objects, such as a lawn mower or motorcycle. Before starting, it is important to make sure that the anchoring system can support the full weight of the object you are lifting.
When using a pulley system, make sure the anchor points are adequate to support the load. Check with the pulley manufacturer to determine the weight it can safely lift. If the load is too large, composite pulleys can be used instead. For vertical lifts, you should use a sprocket set and wear personal protective equipment. Safety precautions when using pulleys are critical to worker health and safety.

China wholesaler 20FT 40FT Fixed Length Pulley Electric Container Spreader near me factory

China wholesaler Minrui Manufacturer Js1500 Fixed Concrete Mixer Pulley Price near me manufacturer

Product Description

Minrui Manufacturer JS1500 Fixed Concrete Mixer Pulley Price

JS1500 Concrete Mixers Introduction:
1. JS1500 concrete mixer machines is widely used for mixing stiff consistency concrete, semi stiff consistency concrete, light weight aggregate concrete and so on.
2. JS1500 electric concrete mixer can be used alone as a separated mixer concrete or for the concrete cement mixer of HZS75 and HZS90 concrete batching plant.
3. Inquiry our cost price concrete mixer to get 1 set spare for free.

JS1500 Concrete Mixer Main Datas:
1. Mixing capacity: 2400L. Discharging capacity: 1.5m3.
2. Mixing power:45kw. Lifting power: 18.5kw.
Minrui Group Production Introduction:
1. 98% parts of mixer concrete machine, concrete plant, concrete pump are independent production.
2. Strict quality control: ensure the superior quality and long service lift of twin shaft concrete mixer.
3. SGS, ISO, IAF, CQC, GS etc certifications.
4. Supply free OEM, ODM for large capacity concrete mixer.
5. Separated production line of automatic concrete mixer: provide short delivery time and plentiful stocks.

Minrui Concrete Mixer Plant Packing Details:
1. Concrete Batching Plant: load into 40HQ container.
2. 1.5 Cubic Meters Concrete Mixer: plastic film outside and fit in 20GP or 40HQ container.
Minrui Factory Introduction:
1. Minrui factory was founded in 2001 year. As the direct manufacturer of China concrete mixer, concrete batching plant, concrete pump, concrete mixer truck etc concrete machinery.
2. 3 installation lines and 2 spares production lines.
3. Supply free design for concrete mixer, concrete mixing plant, concrete pump etc.
4. Support free installation of concrete mixer plant.
5. Provide pre-shipment inspection and test video before delivery.

Minrui Service:
1. Supply free techinical support.
2. Any question about the concrete machinery, please feel free contact us.
3. Contact us freely for our cost price and specification.

Pre-Sales Service	After-Sales Service
1. 24 hour online, promise customers inquiry and consulting being replied in half hour.	1. Training how to install and use the concrete batching plant and mixer.
2. Supply OEM/ODM, 3% discount for trial order and customers.	2. Engineers are available to service machinery maintenance and installation in overseas.
3. Welcome to visit our Factory and suggestions for Minrui machines.	3. Track ship every 2 days until customer get concrete batching plant or mixer.
4. Support third part test and CIQ.	4. Promise machinery problem to solve within 24 hours.

Types of Pulley Systems

If you’ve ever tried to lift a pail of water, you’ve probably seen the pulley system in action. Pulleys are extremely useful tools for everything from household appliances to heavy industrial machinery. Different kinds of pulley systems are classified according to their amount of motion. Some types have fixed axes, while others have movable axes. Some common uses of pulleys are listed below.

two-wheel pulley

Pulleys are complex structures with thin-walled and thick-walled sections. Therefore, they require specific forging designs. The tool concept for the production of pulleys is shown in Figure 11.6. Using the generated tool, the pulley can be forged into different shapes. Process parameters must be optimized based on material, surface quality and metallographic analysis.
Pulleys are wheels mounted on shafts. Its main function is to assist the movement of heavy objects. A single-wheel pulley can change the direction of the force, enabling a person to pull heavy objects. A dual-wheel pulley distributes the weight evenly across both wheels, allowing it to lift the same weight with half the effort.
The mechanical advantage of a two-wheel pulley is that it reduces the force required by about half. A 100 kg object can be lifted with a force of 500 Newtons. The mechanical advantage of a pulley with 2 wheels is twice that of a single-wheel pulley. However, care should always be taken when using two-wheel pulleys.
Two-wheel pulleys can be fixed or movable. A single wheel pulley can only change direction when the load is placed on 1 side of the wheel. Two-wheel pulleys change direction when lifting a load, requiring half the force. Live wheels are better for heavier loads. The movable pulley can be adjusted with the load, and the load distribution is more uniform. Active pulleys can be used with single-rope or two-wheel pulleys.
A pulley system with 2 wheels is called a compound pulley. This type of pulley system has a complex design that reduces the force required to move the load. Two-wheel pulleys are common in industrial and construction environments. These pulleys require a lot of space to install and operate. Additionally, they require regular maintenance to avoid wear and tear.
pulley

composite pulley

Compound pulleys are used to increase lift. One fixed pulley is attached to the overhead while the other fixed pulley is attached to the load. This setup minimizes the force required to lift weights, allowing you to lift heavier weights. There are several different types of compound pulleys, each with their own strengths and weaknesses. Below are some examples of their application. Some of the most common are listed below.
Composite pulleys are usually made from 2 different types of wheels. The first 1 is fixed and secure. The second type, movable, is attached to something that moves. The third type, compound pulley, is a combination of a movable pulley and a fixed pulley. Below are 3 types of comparisons. The table below compares them and explains their advantages and disadvantages. Composite pulleys are the most versatile of the three.
The number of sheave segments that make up the composite sheave system increases the mechanical advantage of the system. Each segment adds 1 percent of the total weight, and the ideal mechanical advantage is 2 or more. So a compound pulley with 4 segments will lift three-quarters of the weight. This is because the force applied to the load is multiplied by four. The result is a better boost.
While composite pulleys have many uses, they are most commonly used on larger sailboats. These pulleys work by changing the direction of the control wire or by changing the mechanical force of the rope. They also make it easier to lift heavier objects. Composite pulleys are more expensive than simple pulleys, so consider your needs before buying. The advantages of composite pulleys outweigh the disadvantages.
A basic compound pulley is a device consisting of 2 wheels with fixed points. Ropes are looped around the wheels and are used to lift heavy objects. When you pull on the rope, the rope pulls the 2 wheels closer together. Serious injury could result if this equipment is installed incorrectly. Never exceed the lifting capacity of pulleys and other safety devices that may be attached. When using pulleys, be sure to follow the instructions on the mounting hardware to avoid accidents.
pulley

Fixed pulley

Moving pulleys and fixed pulleys are different types of mechanical devices. The movable pulley moves with the object it is used to lift. Because it attaches to the object it is used to lift, it is great for lifting heavy objects. These devices are used in construction cranes and multipurpose elevators. There are many different types of pulleys, and their uses vary widely. Below is a brief overview of these devices.
The simplest pulley set consists of a wheel that is mounted on the ceiling. A rope is attached at 1 end and a person pulls at the other end. The rope is strong enough to keep a person standing while lifting weights. It takes about 200 Newtons of force to lift a 20 kg weight. In contrast, a movable pulley requires a force of 1000N, which makes it easier to lift heavy objects.
Fixed pulleys are another common lifting device. They work by using ropes and slotted wheels attached to the object to be lifted. These devices are convenient to use because they are easy to set up. Moving the scroll wheel doesn’t change direction, so it’s easier to move objects without putting too much pressure on the back. Unlike a moving rope, a moving object will feel much lighter than its actual weight.
Fixed pulleys are widely used in construction and agriculture. Fixed pulleys can help lift supplies and equipment from scaffolding. These items are often heavy and difficult to lift directly. Fixed pulleys at the top of the scaffolding will allow people at the bottom to lift objects more easily. As a result, those at the bottom are less stressed and more productive. Fixed pulleys will save time and money compared to moving ropes.
Composite pulleys combine fixed and movable pulleys to increase the power of movement. A compound pulley system uses both types of pulleys and enables a person to change direction by reversing the direction of a force. The compound pulley system will save time and effort as the user only has to put in half the effort. Unlike moving ropes, composite pulleys are easy to adjust and are the most versatile system on the market.
pulley

Blocks and tackles

A pulley block system is a rope hoist that uses a set of pulleys mounted on a frame. The blocks are arranged in a row, and the threaded rope is called a pulley. Pulley systems help amplify the tension of the rope and are common in sailboats, cranes and drilling rigs. However, these systems are not without drawbacks.
The pulley pulley system can be equipped with as many pulleys as required. This method allows a person to lift heavy objects. The pulley block system can contain the required number of pulleys to achieve the desired height. The main disadvantage of pulley systems is that they create a lot of friction on the pulley shaft.
Pulley systems use 2 types of pulleys. A movable pulley is attached to the load, allowing it to move with the load. On the other hand, fixed pulleys are fixed on fixed points. Therefore, a pulley block system may consist of multiple pulleys mounted on a shaft. For example, the 2 pulleys attached to the shaft each have their own mechanical advantages.
Several types of tackle systems have been developed in recent centuries. The most basic is the gun mount, which uses 2 pulleys to lift the load. The mechanical advantage of such a system is 2 to 3 times the distance required by the rope to move the load. Depending on how they’re assembled, the system can lift 400 pounds with 80 or 100 pounds of force.
Another type of pulley is a combination of multiple wheels. The wheels on pulleys are supported by a housing or frame. The chain is attached to the pulley, and the rope is pulled to lift it. A combined pulley system will have multiple wheels. As the load increases, the force on the pulley also increases. This approach is generally more expensive than intercept and intercept systems.

China wholesaler Minrui Manufacturer Js1500 Fixed Concrete Mixer Pulley Price near me manufacturer

China Standard China Suppliers General Industrial Conveyor Equipment Fixed Belt Conveyor with Good quality

Product Description

China Suppliers General Industrial Conveyor Equipment Fixed Belt Conveyor

Product Introduction

The belt conveyor has the advantages of large conveying capacity, simple structure, convenient maintenance and standardization of components. It can be transported in a single unit according to the requirements of the transportation process. Multiple belt conveyors consist of or are combined with other conveyors to form horizontal or inclined conveyor systems to meet the needs of different layouts.

Our Advantages

1. Belt conveyor is advanced and simple in structure and easy to maintain.

2. Its transfer capacity is high, transfer distance is long.

3. Widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material.

4. In many situation, it is a very important component of nonstandard machinery.

5.We have various types of hopper belt conveyor, such as 400, 500, 650, 800, 1000, 1200 etc.

Product Parameters

Touch roll

form

Belt speed

(m/s)

Belt width(mm)

500

650

800

1000

1200

1400

Capacity(t/h)

Groove

touch roll

0.8

104

1.0

131

278

435

655

891

1.25

122

206

318

544

819

1115

1.6

156

264

445

696

1048

1427

2.0

191

323

646

853

1284

1748

2.5

232

391

551

1033

1556

2118

3.15

824

1233

1858

2528

4.0

2202

2995

Parallel

touch roll

0.8

118

1.0

147

230

345

469

1.25

110

184

288

432

588

1.6

142

236

368

558

753

2.0

103

174

289

451

677

922

2.5

125

211

350

546

821

1117

Working Principle

A material transfer process is formed between the initial feed point and the final discharge point on a certain conveying line. It can not only carry out the transportation of scattered materials, but also carry out the transportation of finished goods. In addition to pure material transportation, it can also cooperate with the requirements of the technological process in the production process of various industrial enterprises to form a rhythmical flow operation transportation line.

Company Information

XKJ Machinery has won many honors through outstanding products and advanced technology and we always see product quality as life and customers as God. Customers mean everything and we will always carry out the quality principle of being responsible for every procedure, every product and every customer and serve every customer with heart and soul. Everything we do, we do it for your benefit and we deeply believe that our sincerity will be finally paid back.

Why choose us ?

1.We are real manufacture factory ( not dealer)

All machineries from ZheJiang HangZhou Mining Machinery Manufactory are made by ourselves, with lower price, good quality and assured full after service. So please buy machine from factory.

2. Our equipment with senior engineers for research and development.

3. We’d like to recommend a suitable type for you and send you a best quotation. If you are new for this business, we will help you.

Service

Before-sale services:
We CZPT customers to choose the best and applicable device; provide the advanced, energy-saving and practical technological processes, as well as we are responsible for the plHangZhou and design of the site.

Sale services:

Products must be inspected strictly before being sold; customers are invited to simulate and test machine on-the-spot and raise objections; in accordance with the agreements stipulated in the contract, we will arrange delivery.

After-sale services:
Our Company will send professional engineers to CZPT device installation, debug and train operators until customers are fully satisfied. Moreover, we will design and produce machines according to the special requirements of customers.

Solemn Promise:

The quality guarantee period of machines is 1 year except the wearing parts.

Packing

Normally the machines are taken apart before delivery and are packed by suitable packing ways, the packing ways are as below: nude packing, bundle packing, grass rope packing, water proof packing, wooden pallets packing, wooden box or carton box packing.

FAQ

Q: How about the quality of your products?

A: Our machines are manufactured strictly according to national and international standards, and we take a test on each equipment before delivery. You can also use Trade Assurance by Alibaba for product quality protection, on-time shipment protection and payment protection.

Q: How about the price?

A: As a manufactory, we can give you lower price than trade companies. Besides, customers from Alibaba can get a discount.

Q: Do you provide after-sale service?

A: Yes. The warranty period of our machines is 1 year, and we have a professional after-sale service team to promptly and thoroughly solve your problems.

Q: Do you provide equipment operation training?

A: Yes. We can send professional engineers to the working site for equipment installation, adjustment, and operation training.

Q: Can you test our samples?

A: Yes. You can send your samples to us for test and analysis.

Q: Can we visit your factory?

A: Yes. You can visit our factory anytime you want.

How to Assemble a Pulley System

A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
pulley

Simple pulley

The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the 2 wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The 2 pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to 1 end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use 2 or more wheels to transmit force. Compound pulleys have 2 or more wheels and can lift heavier objects. Dim is POLE2.
pulley

tapered pulley

It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across 4 steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley

pulley pulley system

A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the 2 wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope 4 times reduces the force required to lift 1 foot. Likewise, if the pulley system had 4 pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is 3 times the length of the rope, it will be more than 3 times the required length.

China Standard China Suppliers General Industrial Conveyor Equipment Fixed Belt Conveyor with Good quality

China factory Fixed Double Pulley, Zinc Alloy, Plastic Wheel, Stainless Steel 316, Ss304 near me manufacturer

Product Description

1. Product Description:
Model No.: Single swivel pulley, fixed ring pulley, double fixed/ swivel pulley ,

E.Galvanized, Nickel plate

Material:Zinc Alloy , carbon steel

Surface: Galvanized, Nickel plated, stainless steel 316, stainless steel 304

Packing: gunny bag /carton+ iron pallet/wooden pallet

2.Quality Assurance

Manufacture & Export : We are professional Manufacturer & Exporter of kinds of

shackles over 30 years.

Specilizing in Manufacturing : Single/ double swivel or fixed pulley .

Mainly export to : European countries, USA, Canada, Australia, Japan, Korea,

Singapore and so on.

Capacity :We have our own factory and we can control every step ourseves .

3.Service Assurance

Free Samples for provided CZPT .

Accepting Designated Inspections CZPT .

All enquiry can be reply in 4 hours .

Waiting for our pleasure cooperations.

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
pulley

Basic equations of pulley systems

A pulley system is a mechanism that allows 2 blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the 2 blocks is the total tension and the force acting on the pulley is the weight of the 2 blocks.
This simple mechanism uses 2 simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
pulley

Types of pulleys

There are 3 basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The 2 most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than 1 “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than 1 type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are 3 main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have 1 advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.

application

What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
pulley

shortcoming

Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which 2 pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to 4 times their force when used in hydraulic lifts.

China factory Fixed Double Pulley, Zinc Alloy, Plastic Wheel, Stainless Steel 316, Ss304 near me manufacturer

factory

Types of Pulley Systems

two-wheel pulley

composite pulley

Fixed pulley

Blocks and tackles

factory factory

Hot selling

Types of Pulley Systems

two-wheel pulley

composite pulley

Fixed pulley

Blocks and tackles

Hot selling

Overview of Different Types of Pulleys

A pulley is a wheel mounted on a shaft or shaft. Its purpose is to facilitate the movement or change of direction of the cable or taut rope, and to transmit power between the cable and the shaft. Pulleys are typically used for lifting, winding or forklift applications. If you are building your own pulley system, the following design and installation considerations should be followed. This article will give you an overview of the different types of pulleys.
pulley

Pulley System Mechanics

There are many different ways to utilize the mechanism of the pulley system. The most basic pulley system consists of a fixed wheel and a support frame. Both components are connected by ropes or cables used to support the load. A pulley system is effective when the force required to lift the load is less than the weight of the object being lifted.
One way to use a pulley system is to suspend a block with a mass of 0.80 kg on a fixed pulley. Then another person can hang a bucket weighing up to 40kg. The weight of the bucket is transferred to the fixed pulley. The rope is attached to the pulley by a loop or sling. The rope will spin and pull on the barrel or block.
The pulley system is also an important tool for lifting heavy objects. Pulleys are often used in construction equipment to make lifting heavy objects easier. Gun tackles, yard tackles, and stationary tackle systems are common examples of these devices. They use the mechanical advantage of the design to guide the force that lifts the object. If you want to learn more about pulley systems, visit Vedantu. This website will provide you with a full description of the mechanism and its application.

Types of pulleys

Many different types of pulleys are used to lift heavy objects. They change the direction of the force and are an integral part of the cable system. Therefore, pulleys can move large and heavy objects more easily. However, before buying a pulley, you should have an idea of the benefits it brings. Below are some of the most common uses for pulleys.
Conical Pulley: Consists of several small conical pulleys connected to each other. The larger base of 1 pulley is used to guide the force. Round pulleys are used in the same way as step pulleys. They are widely used in industry and can be purchased at any hardware store. Pulleys are a huge investment, and the benefits they provide far outweigh the cost.
Movable Pulls: These are similar to their names, but work by allowing objects to move with the pull. Their movable parts are attached to the object to be lifted. They are also ideal for lifting heavy loads and can be found in utility elevators and construction cranes. They are also used in many other industries. They can also be made of wood, plastic or metal. The type of pulley you use depends on its intended use.

Mechanical Advantages of Pulley Systems

A pulley system is a simple machine that reduces the effort required to lift heavy loads. This mechanical advantage is proportional to the number of loops. For example, if you have a single rope loop, you must apply equal force to lift the weight. When you add another rope loop, you can lift heavier weights just by applying the same force. Therefore, a pulley system is an excellent way to use gravity to your advantage.
Mechanical advantage is a measure of the effectiveness of a pulley system. This ratio of force to work is called the mechanical advantage. In other words, if the rope system has a large mechanical advantage, it means that it requires less force to lift heavier loads. This advantage is usually measured in kilograms and is the same for all pulley systems. In general, the greater the mechanical advantage, the less effort is required to lift the load.
The mechanical advantage of a pulley system is that a single movable pulley requires half the force to lift an object than a single fixed pulley. Assuming frictionless bearings, the MA of a single pulley system is 2, similar to the MA of a single lever. A single pulley travels twice as much as it takes to move heavy objects manually.
pulley

Considerations when designing and installing a pulley system

The capacity of the pulley depends on the type and diameter of the cable. Besides its diameter, its sheath should also support it well. The basic function of the pulley is also important. However, most people tend to ignore the pulley selection process, resulting in ineffective load-pull capabilities. To avoid such problems, different parameters must be carefully considered during design and installation.
During the design and installation of the pulley system, the ratio of the cable diameter to the largest pulley diameter must be considered. Those who work in the industrial sector will have an idea of this ratio. The greater the D:d ratio, the greater the capacity of the cable to withstand the load. The best way to ensure secure design is to take the right information and use it to design a system that is both robust and secure.
When designing a pulley system, it is important to remember that the pulley needs to have enough power to operate safely. In addition to horsepower, the belt should have sufficient elongation to absorb shock loads. If the elongation of the belt is very small, it is very likely that the teeth will be sheared or broken, causing serious damage to the system. Extensive belt sag should be compensated for by offsetting the driven pulley. Finally, the frame supporting the pulley should be rigid. Otherwise, the non-rigid frame will cause center distance and tooth skipping changes.

Add more pulleys to the system

Adding more pulleys to the spool might have some effect. The friction between the rope and the pulley increases with the number of pulleys, which in practice limits the number of spools. The best solution is to combine the pulleys into 1 housing. If the load is small enough, adding a few pulleys probably won’t make a difference.
Using multiple pulleys allows a single load to be lifted with half the force required. The longer the rope, the greater the mechanical advantage. In fact, a spool can withstand a load of 100 N. Additionally, adding more pulleys quadrupled the mechanical advantage. In this case, a single 100 N load would require a force of 25 Newtons.
When the rope is used, it stretches as the weight of the object increases. This will make the rope longer, increasing its length and increasing the distance over which the load can be lifted. Eventually, the rope will break and the lifted object will fall. Then you will have to buy a new rope. It may seem like an expensive proposition, but it pays off in the long run.

cast iron pulley

Cast iron pulleys are the most popular choice among industrial users. They are made of solid cast iron and usually cost very little. Their rims are held in place by a mesh that extends from a central boss. They also have spokes and arms that hold them in place. These pulleys are ideal for a variety of applications including fan belts, compressors and conveyors.
V-groove drive pulleys are ideal for general purpose pulleys. It has an inner diameter of 1 inch and is commonly used in feeders and ventilation curtain systems. Its steel straps prevent rust and ensure it meets or exceeds industry standards. 3-1/2″ cast iron pulleys are also available. In addition to the V-groove drive pulley, there are similar pulleys for power transmission. The V-groove drive pulley is powder coated for added durability.
The cross section of the arm is elliptical, with the long axis twice as long as the short axis. The radius of the arm is equal to the diameter of the pulley. The thickness of the arm is a key factor to consider when purchasing a pulley. If you’re not sure which material you need, you can always consider wooden or steel pulleys. They are lighter and have a higher coefficient of friction than metal pulleys.
pulley

timing pulley

Plastic timing pulleys have many advantages over steel timing pulleys. On the 1 hand, they are lightweight and corrosion resistant, making them ideal for applications that do not require high torque and tensile strength. Another benefit is their resistance to high temperatures. Plastic timing pulleys are ideal for applications involving flammable gases, solvents or particles. They can last for many years. For more information on the different types of plastic timing pulleys.
Vertical shaft drives require flanged timing pulleys. For large span drives, at least 1 of these pulleys must be flanged. The flange provides a secure connection to the shaft and prevents ratcheting of the timing belt. Finally, HTD timing belt teeth prevent timing belt ratcheting. These teeth need a large enough space to be seated. However, they can also cause a backlash. These pulleys are not suitable for applications where positional accuracy is critical.
Timing belt systems are designed to avoid such problems. The drive shaft and the driven shaft are aligned with each other. The pulleys are located on different planes and are connected by pitch lines. The pitch line of the timing pulley coincides with the pitch line of the belt. These pulleys are also easier to implement and maintain. It is better to use a synchronous system because the resulting gear system emits less noise than other systems.

Hot selling

Best Sales

Pulley Type

There are several types of pulleys. These include fixed pulleys, load multipliers and movable pulleys. Below is a description of each pulley type. A load multiplier is a special type of pulley with multiple wheels for increased lifting capacity. It is used in a wide range of applications including power transmission and construction. Some common uses of pulleys are listed below.

moving pulley

Movable pulleys work by transferring the weight of a load to another object of the same mass. Since a live pulley is inherently frictionless and weightless, the force required to lift a load with it is the same as the weight of the load. This principle applies to tall buildings and residences. It is an excellent choice for lifting heavy objects such as furniture and washing machines.
A pulley is a mechanical device with a wheel that rotates on a shaft. The axle is attached to the wheel and is usually fixed. The movable pulley can be fixed or movable, both of which can change the direction of the force on the rope. Some pulleys can also change the magnitude and direction of the force. They are ideal for a variety of applications, from lifting heavy objects to transporting objects.
Another type of movable pulley works by transmitting force to another object. It has a free axis and the total force provided by the rope tension is balanced. Since the tension on the rope is constant in each segment, pulling 1 end of the rope will double the force on the shaft, resulting in 2 mechanical advantages. This mechanical advantage is the main reason why movable pulleys are so versatile.
Another form of moving pulley is called a KWL diagram. The KWL diagram summarizes the basic concepts of the drive wheel. KWL diagrams are an excellent way to assess a student’s understanding of the concepts discussed in the course. Word questions are a great way to check whether students understand concepts. When students answer the word questions correctly, the answer is yes!
pulley

Fixed wheel pulley

If you need to move heavy objects, a single fixed wheel pulley is not a good choice. Using a single fixed pulley might be similar to using a handbag, but it’s not very convenient. This type of pulley system relies on friction to transmit motion. As a result, it can slip and isn’t always reliable. Fortunately, you can find other options that work just as well.
Fixed pulleys are the most basic type of pulley. They consist of grooved wheels and ropes attached to objects. These pulleys make lifting easier. Because the rope or cable only moves in 1 direction, the movement of the object feels lighter. And they are also easy to install. However, before you buy a fixed wheel pulley, make sure it is strong enough to support the weight of the load.
The disadvantages of fixed pulleys are obvious. One of them is the lack of mechanical advantage. A fixed pulley pulls up with the same force as a single moving pulley, and a single fixed pulley is not particularly effective as a force multiplier. However, the effect is more pronounced when you combine multiple fixed-wheel pulleys. You will get double the power! So what do fixed wheel pulleys have to offer?
Fixed wheel pulleys can be as small as a ring. A single ring pulley requires twice as much force as the weight being pulled. Adding more loops to the rope will reduce the effort required to pull the weight. The mechanical advantage of a fixed pulley is proportional to the number of strands running to the free pulley. A 100-pound pull on the free end will lift a 300-pound load.
pulley

composite pulley

Compound pulleys are pulleys that can be used to change the direction of a control wire. It can also be used to modify the mechanical force of the wire by moving the item it is connected to. In galleons, compound pulleys are more common. They are often combined with other ropes for mechanical advantage. Here are some common uses for composite pulleys.
The ideal mechanical advantage of a pulley is equal to the number of rope segments that pull up the load. This means that the more rope segments, the less force is required. A compound pulley will have the ideal mechanical advantage of 2, which means it will generate more force than a simple pulley. Composite pulleys are also more efficient at transmitting force because their number of rope segments is usually equal to the unit weight.
Composite pulley systems use more than 2 pulleys and ropes. More pulleys will reduce the force required to move heavier objects. They are usually used in large sailboats. The system is also used on construction sites. It can be used for a variety of applications, including lifting large objects or transmitting electricity. You can imagine how it would change your life if you had to move a large sailboat, but the result would be the same: a composite pulley system would make it easier to lift a large sailboat.
Composite pulleys are also known as fixed pulleys. The fixed pulley is stationary, and the movable pulley moves back and forth. The latter is more effective when used with a detachable cord or strap. On the other hand, a moving pulley is a moving pulley and it gives you a mechanical advantage. You can imagine this pulley on a flagpole.

load multiplier

The multiplication system has 3 basic parts: the rope grab, the connector, and the pulley. While some basic multipliers may combine the 3 parts, the concept remains the same. The multiplication system can make pulling the rope easier by reducing the amount of friction that occurs. Below are some examples of multiplication systems. A compact rope grab is a great option for resetting the multiplier.
The load reduction that a pulley system can achieve is proportional to the number of ropes used to support it. Although most utility pulley systems use only 4 ropes, the theoretical maximum load reduction is a quarter of the actual load. In other words, the four-wheel system only reduces the weight of a 1,000-pound load by a quarter. That would require 167 pounds of force, a far cry from the 500-pound load a single pulley system can achieve.
The mechanical advantage of a pulley system can be calculated by calculating the ratio between the forces exerted on each wire. For example, a 90-kilogram load is supported by 3 ropes, each weighing about 30-5 pounds. The ropes on pulleys A and B each carry a load of 60 kg. Using this formula, a single pulley system will yield a mechanical advantage over 2 tractors.
To calculate the force required to pull the rope over the pulley, measure the angle and deflection between the ropes. The deflection angle when added to the included angle should equal 180 degrees. A 75 degree angle requires 159% of the load force. This means a total load multiplier of four. This formula is an important tool for calculating the force multiple of the pulley.
pulley

Disadvantages of fixed pulleys

There are 2 basic types of pulleys: movable and fixed. Active pulleys are more advanced, allowing the pulley to move according to the load. They reduce the force required to lift the load. Active roller pulleys are more compact and therefore take up less space. Both types are good for lifting heavier objects, but they each have their pros and cons.
Fixed wheel pulleys can be used to lift heavy objects. This type of pulley consists of a wheel with a fixed shaft that has grooves on its edges for guiding ropes or cables. This is a simple machine as no motor or engine is required to lift objects. When 2 or more wheels are used together, the ropes around the wheels form a powerful hoist.
Single wheel pulleys are not suitable for lifting. They tend to push things down. Also, they are unreliable because they rely on friction and can slip. Also, a single wheel pulley would require a lot of space. Another disadvantage of fixed-wheel pulleys is that they make it difficult to move heavy objects easily. Single fixed-wheel pulleys also tend to slip easily, making them a poor choice for many applications.
Fixed wheel pulleys are also easier to install and maintain than manually operated ones. It requires less space and lubrication than manual pulleys. Manual pulleys can cause injury because the operator will be lifting the full weight of the heavy object. Additionally, rope slippage can lead to muscle strains and rope burns. And the system requires frequent maintenance.

Best Sales

China wholesaler Ductile Iron Casting Grey Iron Casting Belt Pulley with Free Design Custom

Product Description

Product Index

Ductile iron

Grey iron

Craft

Iron Casting

China

QT400-18

QT450-10

QT500-7

QT600-3

QT700-2

QT800-2

QT900-2

HT350

HT300

HT250

HT200

HT150

Germany

GGG40

GGG50

GGG60

GGG70

GGG80

GG15

GG20

GG25

GG30

GG35

United state

60-40-18

65-45-12

70-50-5

80-60-03

100-70-03

120-90-02

NO60

NO50

NO45

NO35

NO30

NO20

International

EN-GJS400

EN-GJS450,; EN-GJS500,; EN-GJS600

EN-GJL-150

EN-GJL200,; EN-GJL250

EN-GJL300

Chemical elements content

C:;3.;5-3.;8&percnt;

C:;3.;2-3.;7&percnt;

Si:;2.;3-2.;8&percnt;

Si:;1.;8-2.;5&percnt;

Mn:;0.;3-0.;5&percnt;

Mn:;0.;6-0.;9&percnt;

P:; ≤0.;09&percnt;

P:;≤0.;12&percnt;

S:; ≤0.;03&percnt;

S:;≤0.;06&percnt;

7&thksim;8

Thinkness

&geq;3.;5mm

&geq;2.;5mm

Our advantage

1.;We offer OEM and ODM service.;
2.;High quality iron and metal casting manufacturer.;
3.;Experienced technical and inspection team.;
4.;Abundant experience in exporting casting products.;
5.;Regularly production reports.;

Packing and delivery
Packing:; Standard export packaging (Wooden,; steel,; carton case or pallet );

Shipping:;sea freight,; air freight,; express

Company Infomation
HangZhou Xin Rong CZPT Casting Co.;,; Ltd was established in 1993( originally named HangZhou Rongxiang Casting plant);.; This is 1 of the leading OEM foundry with over 20 years experience in this field.; We specialized in sand casting,; metal casting,; shell mold casting etc.;
Facilities:; shell core machines,; melting furnaces,; shot blast chambers,; grinding machines,; checkout chemical,; examination equipment,; CZPT front analyzer brinell hardness testers,; CNC machining center.;

Products including:; Auto parts (steering knuckle / spindle,; brake disc,; brake drum,; wheel hub,; motor cover,; impeller,; pulley,; gear,; valve,; etc.;); kitchenware (gas stove parts,; pan support,; floor drain etc.;); Garden protection ( wrought iron gate,; fence parts,; etc.;); road construction ( manhole cover,; road floor drain,; etc.;); pipe fitting etc.;

FAQ

Our after-sales colleague with get in touch with you immediately.; The process as below:;

We will need you to fill up the product defective from with pictures,; we might also request for a sample of the defective product (we will take care of the fright cost if it is ,;manufacturing defected);We will find and solve the issue,; repair the defective items or send the replacement accordingly.; ( free of charge if it is manufacturing defective);We are willing to comply with customer’s reasonable requests

Types of pulleys and their advantages and disadvantages

Basic equations of pulley systems

Types of pulleys

application

shortcoming

China wholesaler Ductile Iron Casting Grey Iron Casting Belt Pulley with Free Design Custom

China Hot selling The Standard Processing Products of Synchronous Pulley of Automation Equipment Parts Are Complete, and The Economic Type Replaces Mismi Yiheda with Best Sales

Product Description

Product Parameters

HangZhou Runkey Precision Technology Co.Ltd .,

We are an industry and trade integration company integrating automation equipment parts, electronic equipment, precision machinery parts, modules and rapid manufacturing. we will always provide you with professional /reliable/high quality quotation and products with perfect services in time.
With rich experience of manufacturing, we aim to develop long term relationships with each and every 1 of our customers by delivering quality workmanship, on time and at a competitive cost. Through making customer satisfaction our top priority, we have been CZPT to go from strength to strength.
Our friendly, efficient and professional service and the ability to meet tight delivery deadlines have helped us to build a large customer base, and enabled us to attract business from a wide area.

As a mechanism for transmitting the rotating power generated by the motor, synchronous belt pulley, synchronous belt idler and synchronous belt are usually widely used for design.

Through the engagement between the synchronous belt pulley, the synchronous belt idler and the synchronous belt teeth, the function of transmission and transmission is realized.

Business Type		Manufacturer,Trader
Our services		ODM/OEM :CNC Machining ,sheet metal ,lathe,wire cutting,injection,vac forming,surface treatment,laser cutting,drilling, grinding, bending, stamping, welding,assembling,extrusion and so on.
Materials(including material cert)		Aluminum:2571/5052/6061-T6/6063/6082/7075… Stainless Steel: 17-4PH/304/303/316/420/410/440C… Steel 1214L/1215/1045/4140/SCM440/40CrMo/… Titanium: TC4/Gr2/Gr5… Brass 3602 / 2604 / H59 / H62 /932 Bearing Bronze …Bronze/Aluminum Bronze Plastic:PEEK/Nylon 66 /ABS/Delrin 150/ POLYCARBONATE/ASTM D6100 Acetal/POM/Rulon/PC…
Finish		polishing/Deburring/ brush/ sand blasting, Normal anodize/harden anodize, black oxide, plating(Chrome/Nickel/zinc/gold/silver…)…
Tolerance		+/-0.005mm,ISO2768 standard class F , Accuracy Of Machining:0.01mm Accuracy Of Grinding:+ or -0.005mm Surface Roughness:Ra0.2(polishing) ,Ra0.4(lathe-turning),Ra0.8(CNC) Parallelism/Verticality/Concentricity:0.02mm(deponds on actual structure /material..)
Lead Time		3-7 days for rapid samples,3-4 weeks for mass production
Drawing Accepted		Solid Works,Pro/Engineer, AutoCAD(DXF,DWG), PDF,TIF , IGS , STP…
Inspection		FAI/100% Inspection/As per customer requirement
MOQ		1 PCs/small/large batches.Depending on detailed orders .
Packing methods		1. Standard package 2. Pallet or container 3. As per customized specifications
Payment		30% T/T deposit with PO, balance 70% T/T before shipment for first cooperation
Our Advantages		1. Reliable Quality 2. Competitive Price 3. High precision, high quality, tight tolerance with 15+ years experience 4. Continuous Improvement 5. On-Time Delivery 6. Customer Satisfaction Questionnaire 7. After-Sales Service
Certificate		ISO9001:2015
Transportation		Air(DedEx/UPS/DHL ..)/Sea ,or customer demands

Designation	Working Range	Machining Accuracy
Turning	Max: Ø 460X1000mm Min: Ø 0.5X10mm	OD Tolerance: ± 0.01(OD: Ø ≤50mm,Length: L≤100mm)
		Hole Tolerance: ± 0.02(Aperture: Ø ≤50mm,Length: L≤50mm)
		Roundness & Concentricity: 0.01~0.02( 3≤ Ø ≤50mm,L≤75mm)
		Surface Roughness: Ra1.6~Ra3.2
CNC Machining	(Maximum Machining Range):1200×2400×700mm (Maximum Machining Weight): 1500kg	Hole Tolerance: ≤± 0.008 (Aperture: Ø 3~Ø 50mm)
		Hole Roundness/Cylindricity: 0.008~0.02 (Aperture: Ø 3~Ø 50mm)
		Hole Pitch/Edge Distance: ≤± 0.01 (Center Distance≤75mm)
		Perpendicularity of Hole Axis: 0.008~0.02 (Hole Depth≤15mm)
		Perpendicularity of Hole Axis: 0.008~0.02 (Hole Depth≤15mm)
		Surface Roughness: Ra0.8~Ra1.6
Circular Grinding	OD: Max Ø 200X750mm ID: Min Ø 5X10mm	OD Tolerance: ≤ ± 0.01 (OD: Ø ≤50,L≤100)
		ID Tolerance: ≤ ± 0.01 (Aperture: Ø ≤10,L≤25)
		Roundness & Concentricity: 0.02 (3≤ Ø ≤50,L≤75)
		Surface Roughness: Ra0.8~Ra1.6

Our Advantages

Quality Control

1) Checking the raw material after they reach our factory——- Incoming quality control ( IQC)
2) Checking the details before the production line operated
3) Have full inspection and routing inspection during mass production—In process quality control(IPQC)
4) Checking the goods after they are finished—- Final quality control(FQC)
5) Checking the goods after they are finished—–Outgoing quality control(OQC)

Why Choose Us

1) Design assistance and full engineering support .
2) Professional at OEM CNC parts .
3) Complete production lines for custom turning, milling, CNC machining sheet metal fabrication, stamping, bending, argon welding
and surface treatment.
4) Advanced machine tools, CAD/CAM programming software.
5) Prototype machining capabilities.
6) Strict quality control standards with a highly qualified inspection department .
7) Continually upgrading and advancing our equipment to remain competitive .
8) Small quality is also available.

FAQ

Q: What do I need for offering a quote ?
A: Please offer us 2D or 3D drawings (with material, dimension, tolerance, surface treatment and other technical requirement etc.),quantity, application or samples.
Q: What is your MOQ?
A: MOQ depends on our client’s needs, besides,we welcome trial order before mass-production.
Q: What is the production cycle?
A: It varies a lot depending on product dimension,technical requirements and quantity. We always try to meet customers’
requirement by adjusting our workshop schedule.
Q: What kind of payment terms do you accept?
A.: T/T, L/C, Escrow, paypal, western union, moneygram etc.
Q: Is it possible to know how is myproduct going on without visiting your company?
A: We will offer a detailed products schedule and send weekly reports with digital pictures and videos which show the machining progress.

Pulley Type

moving pulley

Fixed wheel pulley

composite pulley

load multiplier

Disadvantages of fixed pulleys

China Hot selling The Standard Processing Products of Synchronous Pulley of Automation Equipment Parts Are Complete, and The Economic Type Replaces Mismi Yiheda with Best Sales